| 1. | 122-8717 | [1] | PIN | |
| 2. | 122-8968 | [1] | PLATE-VALVE | |
| 3. | 8T-5005M | [4] | BOLT(M10X1.5X70-MM) | |
| 4. | 1G-7358 | [1] | PLATE-THRUST | |
| 5. | 2H-5549 | [2] | RING-RETAINING | |
| 6. | 137-5117 | [1] | WASHER(36.02X71.76X2.16-MM THK) | |
| 7. | 7X-5433 | [1] | SEAL-LIP TYPE | |
| 8. | 1J-6474 | [2] | RING-RETAINING(EXTERNAL) | |
| 9. | 8H-9789 | [1] | BALL BEARING | |
| 10. | 7X-5478 | [2] | PIN-SPRING | |
| 11. | 122-8713 | [1] | GASKET-END CAP | |
| 12. | 1G-7368 | [1] | BEARING AS-NEEDLE | |
| 13. | 162-0177 | [2] | PLUG AS | |
| | | | (EACH INCLUDES) |
| | 3J-1907 | [1] | SEAL-O-RING | |
| | 9S-8004 | [1] | PLUG(9/16-18-THD) | |
| 14. | 5E-8757 | [1] | BRACKET | |
| 15. | 164-5619 | [1] | PLUG AS | |
| | 2M-9780 | [1] | SEAL-O-RING | |
| | 9S-8006 | [1] | PLUG(7/8-14-THD) | |
| | | | |
| | | | PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY |
| | | | |
| | | | AVAILABLE REPAIR KIT(S): |
| | 231-5215 | [1] | KIT-PUMP REPAIR(DRAG CONVEYOR, AUGER CONVEYOR) | |
| | | | (INCLUDES PISTON, RETAINING RING, WASHERS, SPRING, CYLINDER BLOCK, RETAINER, PIN, SLIPPER RETAINER, GUIDE, |
| | | | HOUSING, SHAFT & END CAP) |
| | 246-2235 | [1] | KIT-SEAL(DRAG CONVEYOR, AUGER CONVEYOR) | |
| | | | (INCLUDES GASKET, LIP SEAL & O-RING SEALS) |
| | M | | METRIC PART |
