| 1. | 125/74200 | [1] | Carrier 14' heavy lift 10mm s/plate | Part is mss use parts marked A. |
| 1. | M.S.S. | [1] | Multi Supersession | |
| 1. | 331/19807 | [1] | Carrier 14' extradig H/L | |
| 1. | 125/76400 | [1] | Carrier 14', heavy lift suitable for jaw hyd | See foot note |
| 1. | 125/95100 | [1] | Carrier | |
| 1A. | 829/01170 | [8] | Boss wear pad adjuster 3/4" UNF | Welded to dipper carrier. |
| 1A. | 826/10345 | [8] | Boss wear pad adjuster M20 thread | |
| 2. | 811/50373 | [1] | Pin pivot | |
| 3. | 1315/3317Z | [2] | Bolt M8 x75 mm | |
| 4. | 1370/0203Z | [2] | Nut lock M8 | For use with items 2 & 12 |
| 5. | 811/90183 | [1] | Pin Pivot | |
| 5. | 811/50365 | [1] | Pin pivot | |
| 5. | 811/50365A | [1] | Pin pivot 50x325mm, 0.1mm o/s | |
| 5. | 811/90183A | [1] | Pin pivot 0.1mm oversize | |
| 5. | 811/50365B | [1] | Pin pivot50X325MM 50x325mm, 0.25mm O/S | |
| 5. | 811/90183B | [1] | Pin pivot 0.25mm oversize | |
| 6. | 1315/3520Z | [1] | Bolt M12 x 100mm | For use with item 5 |
| 7. | 811/50372 | [1] | Pin Pivot | |
| 7. | 811/50372A | [1] | Pin pivot 60x350mm, 0.1mm O/S | |
| 7. | 811/50372B | [1] | Pin pivot 60x350mm, 0.25mm O/S | |
| 8. | 826/01642 | [1] | Capscrew | |
| 9. | 1370/0403Z | [1] | Nut Lock, M12 | |
| 10. | 126/00777 | [1] | Dipper inner NLA, see TI 2/533 | |
| 10. | 128/10774 | [1] | Dipper assembly inner, 14' | |
| 10. | 126/00778 | [1] | Dipper inner jaw hydraulics | |
| 10A. | 829/01201 | [1] | Boss locking | |
| 11. | 809/00125 | [2] | Bearing liner 45mm | Lever pivot |
| 11A. | 809/00129 | [2] | Bearing liner 44.5IDx55.5ODx50long | Bucket pivot |
| 11A. | 809/00176 | [2] | Bearing liner | |
| 12. | 811/50367 | [1] | Pin pivot | |
| 13. | 125/33400 | [1] | Pin pivot | |
| 14. | 122/34401 | [1] | Clip | |
| 16. | 1450/0002 | [2] | Nipple Grease, Straight 1/4 | |
| 17. | 811/70080 | [1] | Pin pivot | |
| 18. | 125/79800 | [1] | Lever tipping twin link position | |
| 18. | 125/79900 | [1] | Lever tipping c/w hose guides | |
| 18. | 125/79700 | [1] | Lever tipping single link position | |
| 19. | 811/20061 | [1] | Pin Pivot 45X300MM | |
| 20. | 1305/3222Z | [3] | Bolt 3/8 | |
| 21. | 1340/0203Z | [4] | Nut lock 3/8" UNF | |
| 22. | 811/50368 | [1] | Pin Pivot | |
| 23. | 1305/3226Z | [1] | Bolt 3/8" UNF x 3.5" | |
| 24. | 811/50369 | [1] | Pin Pivot 45X290MM | |
| 25. | | | 'See Remark' | Tipping link, B4 index |
| 26. | 813/00425 | [2] | Seal pivot pin grease | |
| 27. | 1416/0008Z | [8] | Washer Spring (1/2") | |
| 28. | 911/12400 | [2] | Pin pivot 306mm long | |
| 29. | 106/50001 | [1] | Strap | |
| 30. | 823/00470 | [2] | Washer | |
| 31. | 826/00512 | [2] | Pin Linch | |
| 32. | 819/00100 | [0] | Shim 120x60.5x1.4thick | |
| 33. | 817/00502 | [1] | Label greasing | |
| 34. | 823/00334 | [1] | Clip | |
| 35. | 123/06189 | [4] | Pad top wear | |
| 36. | 1318/3410Z | [8] | Bolt | |
| 37. | 123/03215 | [4] | Pad wear strip bottom, green | |
| 38. | 826/01055 | [8] | Bolt | |
| 38. | 1390/0810Z | [8] | Screw grub, M20 x 40 lg | Was 1315/0808Z - 8 off |
| 39. | 823/00408 | [40] | Washer 2mm | |
| 39. | 1370/0702Z | [8] | Nut thin M20 | |
| 39. | 1420/0012Z | [8] | Washer M20 | |
| 40. | NSP | [8] | None serviced part | Now part of item 35. |
| 41. | 123/04207 | [4] | Plate spreader | Service only |
| 42. | 123/06256 | [8] | Spacer steel 5mm long | Fitted between item 36 & 35 |
