| 1. | 448/57310 | [1] | Axle steer drive 16.2:1 LSD | |
| 1. | 448/58430 | [1] | Axle steer drive 16.2:1 LSD | NLA use 448/57310 |
| 5. | 458/20222 | [1] | Casing | |
| 5A. | 448/56282 | [1] | Breather spring type M10 x 1.5 Thread | |
| 6. | 907/08400 | [2] | Bearing | |
| 6A. | 2203/1082 | [2] | Circlip | |
| 7. | 904/50040 | [2] | Seal | |
| 8. | 448/04802 | [2] | Ring Masking | |
| 9. | 829/00548 | [2] | Bush | |
| 10. | 904/06500 | [2] | Seal | |
| 11. | 4102/1201 | [0] | Gasket multi | |
| 12. | 1321/3515Z | [12] | Bolt (M12 X 65) | |
| 13. | 816/80037 | [1] | Plug Filler 33mm Head, see TI GEN245 | |
| 14A. | 1406/0021 | [1] | Washer Bonded | |
| 14. | 816/80012 | [1] | Plug Magnetic 3/4"BSP | |
| 18. | 458/10426 | [1] | Trackrod assembly | |
| 19. | 1450/0001 | [2] | Nipple grease, straight 1/8 BSP | 1 per side |
| 19. | 835/00017 | [2] | Cap Grease Nipple | |
| 20. | 904/09300 | [2] | Seal oil | |
| 21. | 808/00253 | [2] | Bush 33mm Long 30mm OD X 25mm ID | 1 per side |
| 22. | 911/22800 | [2] | Pin pivot 105mm x 25mm dia. | |
| 23. | 811/10071 | [1] | Pin pivot | Not included in axle assembly. |
| 25. | 1425/0008Z | [2] | Spring Washer M10 | Not included in axle assembly. |
| 26. | 1315/0409Z | [1] | Setscrew M10 x 35 | Not included in axle assembly. |
| 27. | | | 'See Remark' | Steer ram,See E4. Not included in axle assy. |
| 28. | 911/25700 | [1] | Pin pivot | Not included in axle assembly. |
| 29. | 1321/0405Z | [1] | Bolt M10 x 20mm | Not included in axle assembly. |
